Contact info for Architect David Johnson

Shouldn’t take much to install it. Not sure what the relevance is between the window and the brick building… I would do it. Call me at 347-276-6528 Levi SoHoAppliances

levicapland

in Architecture 13 years and 11 months ago

2557

Please log in, in order to post replies!

2557 replies

Newest Oldest

brklynreno | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7672 (8) {
  ["data"]=>
  object(stdClass)#7660 (12) {
    ["ID"]=>
    string(5) "45110"
    ["user_login"]=>
    string(10) "brklynreno"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(7) "1890suz"
    ["user_email"]=>
    string(20) "brklynreno@gmail.com"
    ["user_url"]=>
    string(22) "/forums/users/dean5th/"
    ["user_registered"]=>
    string(19) "2019-03-01 15:14:52"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "1890suz"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(45110)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

No, I wasn’t trying to over-simplify anything, sorry if I didn’t make clear myself. I was just asking on the forum if somebody had this system installed in their home.

brucef | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7671 (8) {
  ["data"]=>
  object(stdClass)#7670 (12) {
    ["ID"]=>
    string(4) "4724"
    ["user_login"]=>
    string(6) "brucef"
    ["user_pass"]=>
    string(34) "$P$BBW3UzNM8B1w6uproJMdiiw1vnHriz1"
    ["user_nicename"]=>
    string(6) "brucef"
    ["user_email"]=>
    string(20) "bruce@jerseydata.net"
    ["user_url"]=>
    string(21) "/forums/users/brucef/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:13:36"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(6) "brucef"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(4724)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I suspect you are attempting to over-simplify what is a non-trivial engineering challenge. While not claiming that HVAC is, in fact rocket science, there are too many variables to answer your questions intelligently without performing at a minimum, an on site inspection of conditioons. It sounds more like you don’t trust the vendors, and your suspicions are probably justified. In a nutshell, you will need to produce enough cold, and you will need to deliver that adequate cold to all locations. The additional NYC layer on the above is code requirements for condenser placement and electrical supply.

batties | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7667 (8) {
  ["data"]=>
  object(stdClass)#7673 (12) {
    ["ID"]=>
    string(6) "179176"
    ["user_login"]=>
    string(7) "batties"
    ["user_pass"]=>
    string(34) "$P$B/OfM0bdse/fKfIs8QwUXGSAdzPwGr1"
    ["user_nicename"]=>
    string(7) "batties"
    ["user_email"]=>
    string(30) "stephaniebatties@sbcglobal.net"
    ["user_url"]=>
    string(49) "http://bstoner.wpengine.com/forums/users/batties/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:39:09"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "batties"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(179176)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

There are window treatments especially designed for tilt and turn windows. Unlike the blinds that are designed for the casement or slider, these blinds are securely attached to the window and do not move forward or bow out as the window tilts. They fit snugly inside the glazing bead. I am not very techi or else I would attach?? a brochure here ,but if you like more info, send me an e mail and I can send you the brochure.

devenco | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7672 (8) {
  ["data"]=>
  object(stdClass)#7674 (12) {
    ["ID"]=>
    string(6) "179015"
    ["user_login"]=>
    string(7) "devenco"
    ["user_pass"]=>
    string(34) "$P$BIbJNm6gWzfImH4cIpeH3LbTSP5ZNj."
    ["user_nicename"]=>
    string(7) "devenco"
    ["user_email"]=>
    string(23) "Wayne@shutterblinds.com"
    ["user_url"]=>
    string(49) "http://bstoner.wpengine.com/forums/users/devenco/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:38:05"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "devenco"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(179015)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Americana has a repair kit that works well and is cheap.  Americana also manufactures replication pocket shutters.  www.shutterblinds.com  800 269 5697

TomVatury | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7671 (8) {
  ["data"]=>
  object(stdClass)#7675 (12) {
    ["ID"]=>
    string(5) "49699"
    ["user_login"]=>
    string(9) "TomVatury"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(9) "TomVatury"
    ["user_email"]=>
    string(23) "tomvatury@horizonyc.com"
    ["user_url"]=>
    string(51) "http://bstoner.wpengine.com/forums/users/tomvatury/"
    ["user_registered"]=>
    string(19) "2010-04-28 17:33:25"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(9) "TomVatury"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(49699)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Tilt and turn windows are difficult mostly because there is not enoght space above the window to install shades or blinds since the window open inwards. There are a few options:
Roller shades tipically take about 3″ of space for manual and 4″ for motorized so if you have at least 3″ or more above the window frame, you could use those. They come in many fabrics solar blackout or you can even use Laiminated shades that is glue any fabric to a roller shade and use it. Another option is to install shades inside the window frame, that way the shade opens with the window.
for this option  you can use cellular shades, silhouette shades or even wood blinds or aluminum blinds. But for the blinds you would be better off connecting the bottom rail too so the blind will move with the window. (they are called hold down brackets) If you have space in front of the window you could install blinds or shades to the ceiling and then put some kind of stopper that will prevent the window from hitting the shade. (not the best option but can be done) As  you can see there are many ways to go about covering tilt and turn windows but it depends on your taste, budget and a picture of the window would help too. If you have any more questions you can post them or email me directly (email on my profile)

jimcollins | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7667 (8) {
  ["data"]=>
  object(stdClass)#7676 (12) {
    ["ID"]=>
    string(6) "179037"
    ["user_login"]=>
    string(10) "jimcollins"
    ["user_pass"]=>
    string(34) "$P$B9FC270g/eC0k/zwrrIwMq4MVXezpy1"
    ["user_nicename"]=>
    string(10) "jimcollins"
    ["user_email"]=>
    string(18) "leafk@socal.rr.com"
    ["user_url"]=>
    string(52) "http://bstoner.wpengine.com/forums/users/jimcollins/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:38:08"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(10) "jimcollins"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(179037)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Make sure to do your research before signing a window contract. Find out if the business is licensed, bonded and insured. Avoid companies who don’t have internal employees and outsource their work to sub-contractors. Make sure the people who will be coming to install your new windows and doors are Ahma certified window and door installers. I found a helpful link for detailed information and pictures for Milgard, Simonton and Superior windows here: www.onlyvinylwindows.com Best of luck! Jim

brooklynhome | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7672 (8) {
  ["data"]=>
  object(stdClass)#7677 (12) {
    ["ID"]=>
    string(5) "39397"
    ["user_login"]=>
    string(12) "brooklynhome"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(12) "brooklynhome"
    ["user_email"]=>
    string(28) "suzanne.pettypiece@gmail.com"
    ["user_url"]=>
    string(27) "/forums/users/brooklynhome/"
    ["user_registered"]=>
    string(19) "2009-10-20 18:16:59"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(12) "brooklynhome"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(39397)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I find the Minka Aire much better built than Hunter.  It never shakes or vibrates and the motor is totally enclosed so the appearance on the outside is very sleek.  I just don’t notice it as much as the Hunter which seems bulkier.  There are tons of online reviews for Minka Aire and I agree with all the positive ones.

ilovestoops | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7671 (8) {
  ["data"]=>
  object(stdClass)#7678 (12) {
    ["ID"]=>
    string(6) "177639"
    ["user_login"]=>
    string(11) "ilovestoops"
    ["user_pass"]=>
    string(34) "$P$B56sNHsypaDxQ6MWJLDSGuIhhlJtxS/"
    ["user_nicename"]=>
    string(11) "ilovestoops"
    ["user_email"]=>
    string(26) "janetroberson@rr-farms.com"
    ["user_url"]=>
    string(26) "/forums/users/ilovestoops/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:26:55"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(11) "ilovestoops"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(177639)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I have the “Ball” style ceiling fan from Modern Fan company in the bedroom, living room, and kitchen.  Only the kitchen fan has a light.  I’ve been very happy with them as they enable me to reduce the use of the a/c plus, when the a/c is on, they distribute the cooling.

brucef | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7667 (8) {
  ["data"]=>
  object(stdClass)#7679 (12) {
    ["ID"]=>
    string(4) "4724"
    ["user_login"]=>
    string(6) "brucef"
    ["user_pass"]=>
    string(34) "$P$BBW3UzNM8B1w6uproJMdiiw1vnHriz1"
    ["user_nicename"]=>
    string(6) "brucef"
    ["user_email"]=>
    string(20) "bruce@jerseydata.net"
    ["user_url"]=>
    string(21) "/forums/users/brucef/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:13:36"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(6) "brucef"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(4724)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I held back giving others a chance to give a whole hearted reco. You could try Alex at Expert Service on Court St. He is an emigre with a can-do attitude. he is appliance repair but I have in the past been amazed with his ingenuity. You sound all worried that you have LG, he won’t care. You can tell him Bruce from Kane St recommended him.

wiley | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7672 (8) {
  ["data"]=>
  object(stdClass)#7680 (12) {
    ["ID"]=>
    string(5) "54363"
    ["user_login"]=>
    string(5) "wiley"
    ["user_pass"]=>
    string(34) "$P$B6zL3fpD9G5zYTuDmVyD3Hthi/Yhrx0"
    ["user_nicename"]=>
    string(5) "wiley"
    ["user_email"]=>
    string(19) "wileynyc1@yahoo.com"
    ["user_url"]=>
    string(24) "/forums/users/wileynyc1/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:16:42"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(5) "wiley"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(54363)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

In general I found them ok  – I used them for a pretty complex install – their quote was about mid-range. They messed up the install, acknowledged their mistake and came up with a solution that I can live with but the whole thing was a hassle. I think for a straightforward split mini -duct they would be fine.

ellenlourie | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7679 (8) {
  ["data"]=>
  object(stdClass)#7671 (12) {
    ["ID"]=>
    string(6) "209451"
    ["user_login"]=>
    string(11) "ellenlourie"
    ["user_pass"]=>
    string(34) "$P$BW7BCPC4MhhU4md6aHcLH/64c1GhM1/"
    ["user_nicename"]=>
    string(11) "ellenlourie"
    ["user_email"]=>
    string(22) "ellen.lourie@gmail.com"
    ["user_url"]=>
    string(0) ""
    ["user_registered"]=>
    string(19) "2024-06-29 12:47:36"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(11) "ellenlourie"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(209451)
  ["caps"]=>
  array(1) {
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(1) {
    [0]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(1) {
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

 How big of a unit do I need? 
It is determined by cooling load calculations, using manual J, based on actual house measurements

 How much does it cost to install?
If you are looking to do proper installation, with electrical work included as well, you expect to pay $5000-$7000 per 1st room and $5000 each additional room

 How much of the AC is external, and does anything rest on the ground? 
mini-split consists of indoor unit and outdoor unit. depending on circumstances outdoor unit can be placed in back yard or on the roof 

How loud is it outside unit?
It is creating noise, at the level of the room air conditioner, or less.

brucef | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7667 (8) {
  ["data"]=>
  object(stdClass)#7681 (12) {
    ["ID"]=>
    string(4) "4724"
    ["user_login"]=>
    string(6) "brucef"
    ["user_pass"]=>
    string(34) "$P$BBW3UzNM8B1w6uproJMdiiw1vnHriz1"
    ["user_nicename"]=>
    string(6) "brucef"
    ["user_email"]=>
    string(20) "bruce@jerseydata.net"
    ["user_url"]=>
    string(21) "/forums/users/brucef/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:13:36"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(6) "brucef"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(4724)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

To cool 800 sq ft is within the available rane of mini-splits. There are 24,000btu air handlers, which might be enough cooling, but might not be distributed from only one location. The multi units allow up to four evaporators, but any locations will require a line set from the outdoor condenser, and a gravity path down to a drain or outside for condensate. You will need 220 out to the condenser with a proper shut-off, ad the outdoor units aren’t too noisy. I think the fujitsu’s are quieter, but you reallly need to stand next to one that is running. They are literally all over the place in brownstone Brooklyn. Look for commercial corner properties like restaurants, they are often wall hung a few feet up.

brooklynhome | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7672 (8) {
  ["data"]=>
  object(stdClass)#7682 (12) {
    ["ID"]=>
    string(5) "39397"
    ["user_login"]=>
    string(12) "brooklynhome"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(12) "brooklynhome"
    ["user_email"]=>
    string(28) "suzanne.pettypiece@gmail.com"
    ["user_url"]=>
    string(27) "/forums/users/brooklynhome/"
    ["user_registered"]=>
    string(19) "2009-10-20 18:16:59"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(12) "brooklynhome"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(39397)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

We have always had overhead fans over the years usually the Hunter line. When we moved last year, I spent the extra money on a Minka Aire and it has been totally worth it.  We went with the Traditional Concept but they have lots of choices.  It works very well and looks good.  The only drawback is I am not crazy about the light although it is dimmable.  Shop around online and you can usually find a discounted price.

tcohen | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7681 (8) {
  ["data"]=>
  object(stdClass)#7679 (12) {
    ["ID"]=>
    string(6) "179000"
    ["user_login"]=>
    string(6) "tcohen"
    ["user_pass"]=>
    string(34) "$P$B0Ohjw.1dVKEsstvRWQI4qc/Wd.gAU/"
    ["user_nicename"]=>
    string(6) "tcohen"
    ["user_email"]=>
    string(17) "tcohen6@gmail.com"
    ["user_url"]=>
    string(48) "http://bstoner.wpengine.com/forums/users/tcohen/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:38:03"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(6) "tcohen"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(179000)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Stay away from Kolbe – the windows in my house rotted from the inside within 10 years. It cost me 6K to fix recently, and I was told that it will cost 30K over the life of the windows. Trying to find if anyone else has had this problem?

flipnbrooklyn | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7682 (8) {
  ["data"]=>
  object(stdClass)#7667 (12) {
    ["ID"]=>
    string(6) "177849"
    ["user_login"]=>
    string(13) "flipnbrooklyn"
    ["user_pass"]=>
    string(34) "$P$BMCKO.vmmRnuDH0kbmQM5qnTRhRE81."
    ["user_nicename"]=>
    string(13) "flipnbrooklyn"
    ["user_email"]=>
    string(24) "saldana.andrew@gmail.com"
    ["user_url"]=>
    string(28) "/forums/users/flipnbrooklyn/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:18:44"
    ["user_activation_key"]=>
    string(20) "dDG75gI6gGoOkpKZmsiF"
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(13) "flipnbrooklyn"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(177849)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

just wondering.. did you go ahead nanawall? i am thinking about installing bi-folding doors as well.  just not sure what my budget is.  does anyone know what the ballpark figure would be?  my backyard entry way is 9 ft by 10 ft.

jimcollins | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7672 (8) {
  ["data"]=>
  object(stdClass)#7683 (12) {
    ["ID"]=>
    string(6) "179037"
    ["user_login"]=>
    string(10) "jimcollins"
    ["user_pass"]=>
    string(34) "$P$B9FC270g/eC0k/zwrrIwMq4MVXezpy1"
    ["user_nicename"]=>
    string(10) "jimcollins"
    ["user_email"]=>
    string(18) "leafk@socal.rr.com"
    ["user_url"]=>
    string(52) "http://bstoner.wpengine.com/forums/users/jimcollins/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:38:08"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(10) "jimcollins"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(179037)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I did a lot of research and discovered http://OnlyVinylWindows.com These guys have a lot of detailed pictures and information on both the Milgard and Simonton vinyl windows. They even have a coupon page to help save you money on your purchase. Well worth checking out.

sabulba | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7681 (8) {
  ["data"]=>
  object(stdClass)#7684 (12) {
    ["ID"]=>
    string(6) "178842"
    ["user_login"]=>
    string(7) "sabulba"
    ["user_pass"]=>
    string(34) "$P$B/TzU6fBG8GTY0udtF.6k5vv5bZ1jT1"
    ["user_nicename"]=>
    string(7) "sabulba"
    ["user_email"]=>
    string(20) "jamesa9887@gmail.com"
    ["user_url"]=>
    string(49) "http://bstoner.wpengine.com/forums/users/sabulba/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:36:11"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "sabulba"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(178842)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

at the current time many kind of shutter with different designs are available and you can the information from the online shopkeeper who is related with the same.     http://www.shutterco.ie/

notny | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7683 (8) {
  ["data"]=>
  object(stdClass)#7682 (12) {
    ["ID"]=>
    string(6) "176903"
    ["user_login"]=>
    string(5) "notny"
    ["user_pass"]=>
    string(34) "$P$B5zb6Uv.RTZjYCcgiES2IzHU2xFOnT1"
    ["user_nicename"]=>
    string(5) "notny"
    ["user_email"]=>
    string(19) "robindull@yahoo.com"
    ["user_url"]=>
    string(20) "/forums/users/notny/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:25:52"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(5) "notny"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(176903)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

deancollins, this guide (http://www.nyc.gov/html/ddc/downloads/pdf/geotherm.pdf) says this regarding running costs: An all-electric service classification from the New York Power Authority at
an average of $0.08 per kilowatt hour allows economical operating costs; this
is approximately equivalent to $0.62/gallon fuel oil and $0.69 /therm gas for
an average GeoExchange efficiency (COP=3.5)

deancollins | 12 years and 11 months ago

string(1) "1"
object(WP_User)#7672 (8) {
  ["data"]=>
  object(stdClass)#7685 (12) {
    ["ID"]=>
    string(5) "25779"
    ["user_login"]=>
    string(11) "deancollins"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(11) "deancollins"
    ["user_email"]=>
    string(19) "dean@collins.net.pr"
    ["user_url"]=>
    string(26) "/forums/users/deancollins/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:07:36"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(11) "deancollins"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(25779)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

does anyone have links to running costs per square foot once the sunk costs are in lace, eg what does it cost to maintain the entire house at 73deg