Valve Height

you can try the salvage yard at the 9th st. entry to lowes…they have a ton of old rediators, but refitting an old radiator is a job best done by a pro

eman134

in Heating 13 years and 6 months ago

4

Please log in, in order to post replies!

4 replies

Newest Oldest

Hardcharger | 13 years and 6 months ago

string(1) "1"
object(WP_User)#4943 (8) {
  ["data"]=>
  object(stdClass)#4894 (12) {
    ["ID"]=>
    string(5) "19679"
    ["user_login"]=>
    string(11) "Hardcharger"
    ["user_pass"]=>
    string(34) "$P$BvkgvmdN4HqKDLtJ.H9wcZbD64/m.s."
    ["user_nicename"]=>
    string(11) "hardcharger"
    ["user_email"]=>
    string(22) "Joshrothenberg@msn.com"
    ["user_url"]=>
    string(33) "http:///forums/users/hardcharger/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:16:48"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "PStreet"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(19679)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

http://cdn.brownstoner.com/4e9a13478f94e-.jpg

Ok, I am going DIY on this. I managed  to remove that extension coupling without damage and resintalled the valve. The coupling had rope packed in the threads.   It is now only 3 1/2″ off the floor to the valve now, and the Gov-Free Radiator has the opening at 2 1/2″ .  Is that a standard height, or will I find different heights on different brands?  This unit is just tall enough that building it up an inch and an eighth will not allow my window shutters to open (!!!).  Where can I go for another option?

stevecym | 13 years and 6 months ago

string(1) "1"
object(WP_User)#4944 (8) {
  ["data"]=>
  object(stdClass)#4945 (12) {
    ["ID"]=>
    string(5) "21525"
    ["user_login"]=>
    string(8) "stevecym"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(8) "stevecym"
    ["user_email"]=>
    string(24) "stevecymbalsky@yahoo.com"
    ["user_url"]=>
    string(30) "/forums/users/thetinkerswagon/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:05:31"
    ["user_activation_key"]=>
    string(20) "xLyD4JX1CSeJzFu7zs4j"
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(8) "stevecym"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(21525)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Look, it is a one pipe.  This radiator has to be up higher than the valve as the condensate has to flow back down the pipe.  that pipe that is sloped down by 25 degrees toward the rad should be sloped up about 5 degrees toward the rad.  if the top of the rad is hitting a shutters, you must lower the valve more or get a shorter (and longer) radiator.  also, though I think that elbow is painted, someone else said it looked like galvanized.  If it is galvanized, it should be removed and replaced with black pipe.  Steve

Master Plvmber | 13 years and 6 months ago

string(1) "1"
object(WP_User)#4932 (8) {
  ["data"]=>
  object(stdClass)#4942 (12) {
    ["ID"]=>
    string(4) "1447"
    ["user_login"]=>
    string(14) "Master Plvmber"
    ["user_pass"]=>
    string(34) "$P$BSHLZQSJWUzjnaSv9fyWJpNYjwcz.u."
    ["user_nicename"]=>
    string(14) "Master Plvmber"
    ["user_email"]=>
    string(24) "info@gatewayplumbing.com"
    ["user_url"]=>
    string(30) "http://www.GatewayPlumbing.com"
    ["user_registered"]=>
    string(19) "2007-08-10 20:40:53"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(14) "Master Plvmber"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(1447)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Is that the Gov-Free 19″ or 25″ high radiator? We install cast iron convectors where sill heights interfere with free-standing radiators.
Here’s one in progress: 

http://cdn.brownstoner.com/4e9a955d4a9e4-processed-cast_iron_convector.jpg

eman134 | 13 years and 6 months ago

string(1) "1"
object(WP_User)#4943 (8) {
  ["data"]=>
  object(stdClass)#4941 (12) {
    ["ID"]=>
    string(6) "177006"
    ["user_login"]=>
    string(7) "eman134"
    ["user_pass"]=>
    string(34) "$P$BaRrlDjFBcYAeDJ9.lwOTJ9pQC9nsT."
    ["user_nicename"]=>
    string(7) "eman134"
    ["user_email"]=>
    string(23) "errol832000@hotmail.com"
    ["user_url"]=>
    string(29) "http:///forums/users/eman134/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:25:55"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "eman134"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(177006)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

choice one: get a shorter radiator choice two; hire a plumber to cut out the nipple and replace it with a shorter nipple,in order to lower the valve