Looking for a GC with lots of structural experience - Lintel failure

Hey Brownstoner community! I’m looking to find some recommendations about GCs to bid on a structural, and somewhat complex construction project.

Long and short we purchased a Bed Stuy brownstone last year with a beautiful full glass rear on the parlor level. Unfortunately, whoever did the work put in a lintel that was just too small for the facade, and now I’m getting movement which could be catastrophic down the line. I have initial engineering drawings ready for bids but need to look for someone who I can trust to do this job right – it’s likely going to be a bit complex so need someone who has a lot of experience with external/structural work – not looking for someone who’s going to say “oh just replace the lintel with a bigger one.” If you have any suggestions, I’m all ears!

Thanks in advance!

csgo.expertt

in General Discussion 4 years and 6 months ago

5

Please log in, in order to post replies!

5 replies

Newest Oldest

restorationcontractor | 4 years and 6 months ago

string(1) "1"
object(WP_User)#4962 (8) {
  ["data"]=>
  object(stdClass)#4943 (12) {
    ["ID"]=>
    string(6) "179166"
    ["user_login"]=>
    string(21) "restorationcontractor"
    ["user_pass"]=>
    string(34) "$P$Baq67F8/sTzUHPotbkHSHTq3u2mFo5/"
    ["user_nicename"]=>
    string(21) "restorationcontractor"
    ["user_email"]=>
    string(16) "Larconst@aol.com"
    ["user_url"]=>
    string(43) "http:///forums/users/restorationcontractor/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:03:32"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(22) "Restoration Contractor"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(179166)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Can you post a photo?

csgo.expertt | 4 years and 6 months ago

string(1) "1"
object(WP_User)#4961 (8) {
  ["data"]=>
  object(stdClass)#4960 (12) {
    ["ID"]=>
    string(6) "203095"
    ["user_login"]=>
    string(12) "csgo.expertt"
    ["user_pass"]=>
    string(34) "$P$BSqouUrBkax6EKMrY3IccQInGI3YV/1"
    ["user_nicename"]=>
    string(21) "csgo-experttgmail-com"
    ["user_email"]=>
    string(22) "csgo.expertt@gmail.com"
    ["user_url"]=>
    string(0) ""
    ["user_registered"]=>
    string(19) "2019-07-11 14:14:40"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(11) "Anton Mazur"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(203095)
  ["caps"]=>
  array(1) {
    ["subscriber"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(1) {
    [0]=>
    string(10) "subscriber"
  }
  ["allcaps"]=>
  array(3) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Awesome, thank you @stickerhappy and @janedrew I’ll reach out to both and hope for the best 🙂

@urbandad reach out to me on instagram @unbofu

Guest User | 4 years and 6 months ago

string(1) "3"
string(6) "200749"

Seth seemed great but he is pretty busy FYI. I met with him but he was pretty behind already. DBe was another firm that I met with who might be an option.

stickerhappy | 4 years and 6 months ago

string(1) "1"
object(WP_User)#4927 (8) {
  ["data"]=>
  object(stdClass)#4925 (12) {
    ["ID"]=>
    string(6) "100776"
    ["user_login"]=>
    string(12) "stickerhappy"
    ["user_pass"]=>
    string(34) "$P$B22w2UCKIlYWBOfDUi2mGifya.FPZ01"
    ["user_nicename"]=>
    string(12) "stickerhappy"
    ["user_email"]=>
    string(20) "andysclass@gmail.com"
    ["user_url"]=>
    string(22) "/forums/users/bknites/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:32:57"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(12) "stickerhappy"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(100776)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

We were very happy with the contractor we used and he did some significant structural work on our project, including similar steel lintel work on a large opening in the back wall. It all turned out very well and he took a very safe cautious approach to the whole job.
His name is Seth at Design2Build and his number is (917) 379-3300.

hkapstein | 4 years and 6 months ago

string(1) "1"
object(WP_User)#4928 (8) {
  ["data"]=>
  object(stdClass)#4929 (12) {
    ["ID"]=>
    string(6) "197623"
    ["user_login"]=>
    string(9) "hkapstein"
    ["user_pass"]=>
    string(34) "$P$Bi/rarQU.AidQ5DWnWIzXSi7UikLcx/"
    ["user_nicename"]=>
    string(31) "boerumamaemailnotprovided-local"
    ["user_email"]=>
    string(19) "hkapstein@gmail.com"
    ["user_url"]=>
    string(0) ""
    ["user_registered"]=>
    string(19) "2018-06-15 18:43:24"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(14) "Helen Kapstein"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(197623)
  ["caps"]=>
  array(1) {
    ["subscriber"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(1) {
    [0]=>
    string(10) "subscriber"
  }
  ["allcaps"]=>
  array(3) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Curious, what is the shoring system your engineer designed like for this?