Forum
Looking for advice about a home improvement project? Want to talk about what’s going on in your neighborhood? Start here.
Find older conversations in our Forum Archive.
Latest Discussions
Post a Topic
starfish11040
in Locksmith and Security 13 years and 1 month ago
A locksmith to AVOID!
Unfortunately I got an emergency call from a tenant that the entrance gate lock was broken and no one could get in or out of…
2
starfish11040
in Locksmith and Security 13 years and 1 month ago
A locksmith to AVOID!
Unfortunately I got an emergency call from a tenant that the entrance gate lock was broken and no one could get in or out of…
0
deancollins
in Locksmith and Security 13 years and 3 months ago
Replacing older gate lock
http://cdn.brownstoner.com/502d09e806cca-.jpg I need to replace an older gate lock for our brownstone. Currently there is so much “play” in the old metal spindles even when…
0
ejalbk
in Locksmith and Security 13 years and 9 months ago
Local Locksmith Needed for Door Check
Boerum Hill area. We need a locksmith or experienced handyman to possibly adjust but more likely replace a door closer for a very heavy metal…
7
Oxygen
in Locksmith and Security 13 years and 7 months ago
Slightly Unusual Lock: Where to Buy?
I want to install a lock for an interior hallway that is accessed via a single French door. The door hardware is from the 1920’s.…
4
Oxygen
in Locksmith and Security 13 years and 7 months ago
Slightly Unusual Lock: Where to Buy?
I want to install a lock for an interior hallway that is accessed via a single French door. The door hardware is from the 1920’s.…
0
bedstuytownhouse
in Locksmith and Security 13 years and 8 months ago
Video intercom installation cost for three units?
Hi all, Does anyone know the approximate cost to have a video intercom installed for a three unit building, including wiring? Also, any recommendations for…
0
ejalbk
in Locksmith and Security 13 years and 9 months ago
Local Locksmith Needed for Door Check
Boerum Hill area. We need a locksmith or experienced handyman to possibly adjust but more likely replace a door closer for a very heavy metal…
0
daveinbedstuy
in Locksmith and Security 14 years ago
Shout out to Houseofantiquehardware.com
http://cdn.brownstoner.com/4ec679889bffa-.jpg I’ve used www.houseofantiquehardware.com for all of my reproduction door hardware and electical plates. Their products are excellent and masterful reproductions for both Victorian hardware…
0
daveinbedstuy
in Locksmith and Security 14 years ago
Shout out to Houseofantiquehardware.com
http://cdn.brownstoner.com/4ec679889bffa-.jpg I’ve used www.houseofantiquehardware.com for all of my reproduction door hardware and electical plates. Their products are excellent and masterful reproductions for both Victorian hardware…
0
rocketship
in Locksmith and Security 14 years and 3 months ago
Locksmith
Can anyone recommend a good locksmith in the South Slope/Sunset Park area? We need to get the cylinders on a couple of locks changed.
10
rocketship
in Locksmith and Security 14 years and 3 months ago
Locksmith
Can anyone recommend a good locksmith in the South Slope/Sunset Park area? We need to get the cylinders on a couple of locks changed.
0
Can’t find the topic you’re looking for?
Find answers, ask questions, and connect with our Brownstoner community.