Can this wooden door be saved?
Put on rubber gloves and apply a chemical stripper to the corners, crevices and molding around the raised panels with a foam sponge brush. Allow the stripper to set according to the manufacturer?s instructions. Wipe away the stripper with a clean rag. Allow the areas to dry and then sand the corners, crevices and molding with a sanding sponge.
grimmsister
in Doors & Windows 10 years and 2 months ago
5
Please log in, in order to post replies!
moriata | 10 years and 3 months ago
string(1) "1"
object(WP_User)#5016 (8) {
["data"]=>
object(stdClass)#4971 (12) {
["ID"]=>
string(5) "37899"
["user_login"]=>
string(7) "moriata"
["user_pass"]=>
string(0) ""
["user_nicename"]=>
string(7) "moriata"
["user_email"]=>
string(21) "sophasaurus@gmail.com"
["user_url"]=>
string(0) ""
["user_registered"]=>
string(19) "2017-08-10 13:58:21"
["user_activation_key"]=>
string(0) ""
["user_status"]=>
string(1) "0"
["display_name"]=>
string(7) "moriata"
["spam"]=>
string(1) "0"
["deleted"]=>
string(1) "0"
}
["ID"]=>
int(37899)
["caps"]=>
array(0) {
}
["cap_key"]=>
string(15) "wp_capabilities"
["roles"]=>
array(0) {
}
["allcaps"]=>
array(0) {
}
["filter"]=>
NULL
["site_id":"WP_User":private]=>
int(1)
}
Hi all, my original front door on my rowhouse has deteriorated over time and the wooden portion by the latch no longer seems entirely secure. Do I need to replace the entire door or can the middle section be securely replaced? Could a GC handle section repair? If total door replacement is necessary, can people suggest a few places that sell original rowhouse doors? Here are pictures of the part that’s worn away. Thanks for your help!
greenmountain | 10 years and 3 months ago
string(1) "1"
object(WP_User)#5015 (8) {
["data"]=>
object(stdClass)#5014 (12) {
["ID"]=>
string(5) "12939"
["user_login"]=>
string(13) "greenmountain"
["user_pass"]=>
string(34) "$P$BnKovbg4FcvougATD6kVp72yuOJzcG."
["user_nicename"]=>
string(13) "greenmountain"
["user_email"]=>
string(23) "aaron@greenmountain.nyc"
["user_url"]=>
string(24) "http://greenmountain.nyc"
["user_registered"]=>
string(19) "2017-08-10 14:15:45"
["user_activation_key"]=>
string(0) ""
["user_status"]=>
string(1) "0"
["display_name"]=>
string(13) "greenmountain"
["spam"]=>
string(1) "0"
["deleted"]=>
string(1) "0"
}
["ID"]=>
int(12939)
["caps"]=>
array(2) {
["subscriber"]=>
bool(true)
["bbp_participant"]=>
bool(true)
}
["cap_key"]=>
string(15) "wp_capabilities"
["roles"]=>
array(2) {
[0]=>
string(10) "subscriber"
[1]=>
string(15) "bbp_participant"
}
["allcaps"]=>
array(4) {
["read"]=>
bool(true)
["level_0"]=>
bool(true)
["subscriber"]=>
bool(true)
["bbp_participant"]=>
bool(true)
}
["filter"]=>
NULL
["site_id":"WP_User":private]=>
int(1)
}
You need to post photos of the entire door from both sides. If it can be restored, you need an architectural woodworker. Many specialize in doors. I recommend Omar and Belda of Artistic Woodworks in the Brooklyn Navy Yard. If they can not restore it, nobody can. But they can reproduce it.
thetinkerswagon | 10 years and 3 months ago
string(1) "1"
object(WP_User)#5011 (8) {
["data"]=>
object(stdClass)#4954 (12) {
["ID"]=>
string(5) "21531"
["user_login"]=>
string(15) "thetinkerswagon"
["user_pass"]=>
string(34) "$P$B9fa6hkzhGwaxF0yusnHu3jP27xv4Y0"
["user_nicename"]=>
string(15) "thetinkerswagon"
["user_email"]=>
string(27) "service@thetinkerswagon.com"
["user_url"]=>
string(30) "http://www.thetinkerswagon.com"
["user_registered"]=>
string(19) "2017-08-10 14:05:31"
["user_activation_key"]=>
string(0) ""
["user_status"]=>
string(1) "0"
["display_name"]=>
string(15) "thetinkerswagon"
["spam"]=>
string(1) "0"
["deleted"]=>
string(1) "0"
}
["ID"]=>
int(21531)
["caps"]=>
array(1) {
["bbp_participant"]=>
bool(true)
}
["cap_key"]=>
string(15) "wp_capabilities"
["roles"]=>
array(1) {
[0]=>
string(15) "bbp_participant"
}
["allcaps"]=>
array(1) {
["bbp_participant"]=>
bool(true)
}
["filter"]=>
NULL
["site_id":"WP_User":private]=>
int(1)
}
[brownstoner.com/tinkerswagon](http://brownstoner.com/tinkerswagon)
resident2 | 10 years and 3 months ago
string(1) "1"
object(WP_User)#5016 (8) {
["data"]=>
object(stdClass)#5039 (12) {
["ID"]=>
string(6) "181002"
["user_login"]=>
string(9) "resident2"
["user_pass"]=>
string(34) "$P$BYKCrEpDU34.3RJghRPk8/Xp1XpCve/"
["user_nicename"]=>
string(9) "resident2"
["user_email"]=>
string(21) "Jamanda1255@Yahoo.com"
["user_url"]=>
string(0) ""
["user_registered"]=>
string(19) "2017-08-10 14:07:33"
["user_activation_key"]=>
string(0) ""
["user_status"]=>
string(1) "0"
["display_name"]=>
string(9) "resident2"
["spam"]=>
string(1) "0"
["deleted"]=>
string(1) "0"
}
["ID"]=>
int(181002)
["caps"]=>
array(1) {
["bbp_participant"]=>
bool(true)
}
["cap_key"]=>
string(15) "wp_capabilities"
["roles"]=>
array(1) {
[0]=>
string(15) "bbp_participant"
}
["allcaps"]=>
array(1) {
["bbp_participant"]=>
bool(true)
}
["filter"]=>
NULL
["site_id":"WP_User":private]=>
int(1)
}
You need a carpenter that specializes in historic restoration, not a GC Most old doors can be restored, they do not make them like they used to. But it is a question of finding the right crafts person and how much you want to spend.
moriata | 10 years and 3 months ago
string(1) "1"
object(WP_User)#5015 (8) {
["data"]=>
object(stdClass)#5038 (12) {
["ID"]=>
string(5) "37899"
["user_login"]=>
string(7) "moriata"
["user_pass"]=>
string(0) ""
["user_nicename"]=>
string(7) "moriata"
["user_email"]=>
string(21) "sophasaurus@gmail.com"
["user_url"]=>
string(0) ""
["user_registered"]=>
string(19) "2017-08-10 13:58:21"
["user_activation_key"]=>
string(0) ""
["user_status"]=>
string(1) "0"
["display_name"]=>
string(7) "moriata"
["spam"]=>
string(1) "0"
["deleted"]=>
string(1) "0"
}
["ID"]=>
int(37899)
["caps"]=>
array(0) {
}
["cap_key"]=>
string(15) "wp_capabilities"
["roles"]=>
array(0) {
}
["allcaps"]=>
array(0) {
}
["filter"]=>
NULL
["site_id":"WP_User":private]=>
int(1)
}
The 2nd pic is the inside of the door. Thanks for the recommendation!