Slide bolts for rear window guards

Would someone who has traditional rear window guards be willing to share a picture of their slide bolts? My GC took mine down when installing windows and discarded them. I would like to replace them. I have spoken to iron workers but none of them can show me a picture of work they’ve done. I’d prefer to show them an example to copy. Thanks in advance

Guest User | 5 years and 4 months ago

2

Please log in, in order to post replies!

2 replies

Newest Oldest

Guest User | 5 years and 4 months ago

string(1) "3"
string(6) "200749"

Thank you Steve. This is very helpful and would be my next step. I am trying to figure out what traditional ones look like. I seem to only have a few low res photos of the original and it’s hard to see the details.

stevecym | 5 years and 4 months ago

string(1) "1"
object(WP_User)#4993 (8) {
  ["data"]=>
  object(stdClass)#4995 (12) {
    ["ID"]=>
    string(5) "21525"
    ["user_login"]=>
    string(8) "stevecym"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(8) "stevecym"
    ["user_email"]=>
    string(24) "stevecymbalsky@yahoo.com"
    ["user_url"]=>
    string(30) "/forums/users/thetinkerswagon/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:05:31"
    ["user_activation_key"]=>
    string(20) "xLyD4JX1CSeJzFu7zs4j"
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(8) "stevecym"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(21525)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

jane, i deal with a lot of slide bolts (usually removing simple steel ones and installing nice brass ones). if you post a pic of the guard where it closes, i might be able to suggest a bolt. there is a lot of hardware store stuff out there and to tell you the truth, a lot of these i have seen on the iron gates are shop fabricated by the maker. that does not mean a hardware store item cannot be welded on. our favorite big box store has these in all sizes.

the other thing to do with weldable mild steel is, take two 1/8″ thick steel plates measuring say 1.5×1.5″ and weld them on line up with one another – on on the fixed part of the guard and one right next to it on the active part- and drill a 1/2″ hole in these and put a pad lock through there. i have seen this a lot.

i am not offering to install or make any of the above.