Need a wooden counter cut down - any ideas of where to go / cost?

I bought a 8 foot long and 25 inch wide wooden countertop from IKEA (and 1.5″ thick).  I need to cut it down so that the width is 20 inches instead of 25.

I have a circular saw but can’t say that I truly trust my skills to make a super clean and accurate cut and I really want it to be exact- I’d feel much more comfortable if someone could run it through a big table saw.

Any idea who might be able to help me out on this one?  I’m located in the Gowanus/PS area and I can easily bring the counter to someone by car so I really just need someone to make this one cut.

Any shops out there that might do this?  Any idea of cost?  Seems like a pretty simple job so I would hope it would be like $25 or something.

All suggestions welcome.

stickerhappy

in Carpenters and Woodworkers 13 years and 8 months ago

8

Please log in, in order to post replies!

8 replies

Newest Oldest

CGmodern | 13 years and 8 months ago

string(1) "1"
object(WP_User)#4945 (8) {
  ["data"]=>
  object(stdClass)#4933 (12) {
    ["ID"]=>
    string(4) "5346"
    ["user_login"]=>
    string(8) "CGmodern"
    ["user_pass"]=>
    string(34) "$P$BpvYZ3yFzBe3V80e3v7IOUvCEqBU7e."
    ["user_nicename"]=>
    string(8) "cgmodern"
    ["user_email"]=>
    string(19) "jackielnx@gmail.com"
    ["user_url"]=>
    string(30) "http:///forums/users/cgmodern/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:13:40"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(8) "CGmodern"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(5346)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

i had the same situation when we renovated our kitchen. the guys at KF cabinets right on 3rd and union ripped down a butcher block countertop for me. they were building some bathroom vanities for me already but i’m sure you could give them a call/email about it. they’re really nice guys…highly recommend. talk to jason.    –jackie
jason.ng@kfkitchencabinets.com / 718-237-5800

stickerhappy | 13 years and 8 months ago

string(1) "1"
object(WP_User)#4944 (8) {
  ["data"]=>
  object(stdClass)#4943 (12) {
    ["ID"]=>
    string(6) "100776"
    ["user_login"]=>
    string(12) "stickerhappy"
    ["user_pass"]=>
    string(34) "$P$B22w2UCKIlYWBOfDUi2mGifya.FPZ01"
    ["user_nicename"]=>
    string(12) "stickerhappy"
    ["user_email"]=>
    string(20) "andysclass@gmail.com"
    ["user_url"]=>
    string(22) "/forums/users/bknites/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:32:57"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(12) "stickerhappy"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(100776)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

OP here- thanks to all for the suggestions.
I also appreciate the personal offer to help, Steve- I might just take you up on that offer.  I’ll be in touch.

studioist | 13 years and 8 months ago

string(1) "1"
object(WP_User)#4940 (8) {
  ["data"]=>
  object(stdClass)#5113 (12) {
    ["ID"]=>
    string(6) "179586"
    ["user_login"]=>
    string(9) "studioist"
    ["user_pass"]=>
    string(34) "$P$BonqUnIgR4UFCqX2hrDa0h44IuuJ1V0"
    ["user_nicename"]=>
    string(9) "studioist"
    ["user_email"]=>
    string(20) "alexis@studioist.com"
    ["user_url"]=>
    string(24) "/forums/users/studioist/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:03:36"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(9) "studioist"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(179586)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I feel your pain! We cut our own beech Numerar countertop and for circular saw newbies, it was neither quick nor easy. But we did it. Good luck.

stevecym | 13 years and 8 months ago

string(1) "1"
object(WP_User)#4943 (8) {
  ["data"]=>
  object(stdClass)#4945 (12) {
    ["ID"]=>
    string(5) "21525"
    ["user_login"]=>
    string(8) "stevecym"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(8) "stevecym"
    ["user_email"]=>
    string(24) "stevecymbalsky@yahoo.com"
    ["user_url"]=>
    string(30) "/forums/users/thetinkerswagon/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:05:31"
    ["user_activation_key"]=>
    string(20) "xLyD4JX1CSeJzFu7zs4j"
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(8) "stevecym"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(21525)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I’ll do it for free, but am located in Middle Village.  You would have to be able to bring it here when I am working.  If you wish to contact me, feel free to get my number off my website and give me a call. Steve http://brownstoner.staging.wpengine.com/tinkerswagon

stevecym | 13 years and 8 months ago

string(1) "1"
object(WP_User)#4944 (8) {
  ["data"]=>
  object(stdClass)#5114 (12) {
    ["ID"]=>
    string(5) "21525"
    ["user_login"]=>
    string(8) "stevecym"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(8) "stevecym"
    ["user_email"]=>
    string(24) "stevecymbalsky@yahoo.com"
    ["user_url"]=>
    string(30) "/forums/users/thetinkerswagon/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:05:31"
    ["user_activation_key"]=>
    string(20) "xLyD4JX1CSeJzFu7zs4j"
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(8) "stevecym"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(21525)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Rip fence on hand held skill saw would do this fine or what DIBS says.  We do both all the time –

Steve

daveinbedstuy | 13 years and 8 months ago

string(1) "1"
object(WP_User)#4940 (8) {
  ["data"]=>
  object(stdClass)#5116 (12) {
    ["ID"]=>
    string(4) "3864"
    ["user_login"]=>
    string(13) "daveinbedstuy"
    ["user_pass"]=>
    string(34) "$P$BtJYyObAQmff2MQp.qFP7/kmwU1bBZ1"
    ["user_nicename"]=>
    string(13) "daveinbedstuy"
    ["user_email"]=>
    string(19) "djl135e54@yahoo.com"
    ["user_url"]=>
    string(55) "http://bstoner.wpengine.com/forums/users/daveinbedstuy/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:23:53"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(13) "daveinbedstuy"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(3864)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

You can do this yourself if you already have the saw.  Get two clamps and clamp a straigtedge piece of lumber square with the corners and use that as the stop to run your saw firmly against it to make the cut.  make sure you have a sharp dine cutting blade so as not to “rip” the surface of the counter.

Make a trial cut first to determine the sharpness of the blade and to be sure there’s no “tear out” on the top surface.

brucef | 13 years and 8 months ago

string(1) "1"
object(WP_User)#5114 (8) {
  ["data"]=>
  object(stdClass)#4943 (12) {
    ["ID"]=>
    string(4) "4724"
    ["user_login"]=>
    string(6) "brucef"
    ["user_pass"]=>
    string(34) "$P$BBW3UzNM8B1w6uproJMdiiw1vnHriz1"
    ["user_nicename"]=>
    string(6) "brucef"
    ["user_email"]=>
    string(20) "bruce@jerseydata.net"
    ["user_url"]=>
    string(21) "/forums/users/brucef/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:13:36"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(6) "brucef"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(4724)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

If you can wait a few weeks, I will have my large table saw set up at a job on Columbia St after Sept 1\. Right now it’s broken down into pieces (cast iron top)

Juno106 | 13 years and 8 months ago

string(1) "1"
object(WP_User)#4944 (8) {
  ["data"]=>
  object(stdClass)#5115 (12) {
    ["ID"]=>
    string(4) "1773"
    ["user_login"]=>
    string(7) "Juno106"
    ["user_pass"]=>
    string(34) "$P$BQwWleDjHSmf44tF/QTbwtL6clZ2LJ/"
    ["user_nicename"]=>
    string(7) "juno106"
    ["user_email"]=>
    string(22) "cstudios@earthlink.net"
    ["user_url"]=>
    string(22) "/forums/users/juno106/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:12:35"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "Juno106"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(1773)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

You might want to give Dykes Lumber a call and see if they will do it. They are on 6th St btwn 2nd and 3rd Ave.