Grant Pulley & Hardware Co. NY
Looking for a brass track for sliding door on cabinets made 1900-1905. Track is stamped as in title and measures 1 1/4″ wide. Track is to fit single wheel mounted in sliding door. Need 24″ section of track. Also 12 wheels to match but track is most important. More dimensional details available if you have…
Looking for a brass track for sliding door on cabinets made 1900-1905. Track is stamped as in title and measures 1 1/4″ wide. Track is to fit single wheel mounted in sliding door. Need 24″ section of track. Also 12 wheels to match but track is most important. More dimensional details available if you have something. All the hardware and wooden drawer slides seem to be made by the above manufacturer for this Chesnut base and upper kitchen cabinet. richfkfd@aol.com
Try here:
http://www.wmjrigby.com/
If you don’t see it on the site (and chances are you won’t) e-mail the site owner. He’s very knowledgeable about old hardware and should at least be able to direct you.
That’s going to be really hard to find. I think you’re better off looking for new replacement hardware. Good Luck