Creating a Door

I would like to cut a new doorway through a wall in my co-op to combine units and I was wondering what a ballpark cost on such a job might be. It is not a load bearing wall and I spoke with the super who told me it?s just a matter of cutting through. The building was built in the 1950s and the wall is a mix of plaster and chicken wire. I don?t need to put in a door, just an opening. Anyone have any experience with this and how much it might roughly cost? Thanks

mrlithe

in Doors & Windows 9 years and 6 months ago

7

Please log in, in order to post replies!

7 replies

Guest User | 9 years and 3 months ago

string(1) "3"
string(6) "196477"

Interesting stuff to hear! A doorway leads to a creative interior to the home. But along with it, it is important to have a impact doors which can safeguard your home as well as give the new and interesting look to the home. My neighbor had such plans and he researched around with [impact doors Miami](http://www.impactresistantwindowsndoors.com/impact-doors-miami/), doors fort Lauderdale and made it suitable to establish a new doorway within his house. It was cheap and in the budget.

BobMarvin | 9 years and 3 months ago

string(1) "1"
object(WP_User)#4921 (8) {
  ["data"]=>
  object(stdClass)#4924 (12) {
    ["ID"]=>
    string(3) "802"
    ["user_login"]=>
    string(9) "BobMarvin"
    ["user_pass"]=>
    string(63) "$wp$2y$10$vXcETAGfbklfbxLqBuZOwe9SvZukjLn11bfJ4K5tk7sYEGuWi6OGW"
    ["user_nicename"]=>
    string(9) "bobmarvin"
    ["user_email"]=>
    string(17) "marvbej@gmail.com"
    ["user_url"]=>
    string(31) "http:///forums/users/bobmarvin/"
    ["user_registered"]=>
    string(19) "2006-09-08 23:16:42"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(10) "Bob Marvin"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(802)
  ["caps"]=>
  array(3) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
    ["SPF Manage Forums"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(5) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
    ["SPF Manage Forums"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

fredbdaniel: huh? Could you please translate that into comprehensible English

tatepittman | 9 years and 4 months ago

string(1) "1"
object(WP_User)#4926 (8) {
  ["data"]=>
  object(stdClass)#4932 (12) {
    ["ID"]=>
    string(6) "195319"
    ["user_login"]=>
    string(11) "tatepittman"
    ["user_pass"]=>
    string(34) "$P$Bg666Y6nMlYEd94li4hB5JeYjIvOWz."
    ["user_nicename"]=>
    string(11) "tatepittman"
    ["user_email"]=>
    string(28) "biancajaspertry853@gmail.com"
    ["user_url"]=>
    string(0) ""
    ["user_registered"]=>
    string(19) "2024-03-26 05:32:38"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(11) "tatepittman"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(195319)
  ["caps"]=>
  array(1) {
    ["participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(0) {
  }
  ["allcaps"]=>
  array(1) {
    ["participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

As the building too old, i would certainly recommend to go for a plaster and to have a new construction of wall before resetting a new doorway.

mrlithe | 9 years and 6 months ago

string(1) "1"
object(WP_User)#4925 (8) {
  ["data"]=>
  object(stdClass)#4927 (12) {
    ["ID"]=>
    string(5) "59935"
    ["user_login"]=>
    string(7) "mrlithe"
    ["user_pass"]=>
    string(34) "$P$BSGrlu42cSjmFWfuHFezFSyDqpuO4Q0"
    ["user_nicename"]=>
    string(7) "mrlithe"
    ["user_email"]=>
    string(23) "jasonstefanik@gmail.com"
    ["user_url"]=>
    string(49) "http://bstoner.wpengine.com/forums/users/mrlithe/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:28:56"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "mrlithe"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(59935)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

The super is new to the building so not sure if he knows anyone. He would most likely recommend one contractor who has done a ton of work in the building and I’ve used him before for other jobs, but I found him over priced and his work barely adequate. So I was hoping people on the forums might have some good referrals.

daveinbedstuy | 9 years and 6 months ago

string(1) "1"
object(WP_User)#4921 (8) {
  ["data"]=>
  object(stdClass)#5093 (12) {
    ["ID"]=>
    string(4) "3864"
    ["user_login"]=>
    string(13) "daveinbedstuy"
    ["user_pass"]=>
    string(34) "$P$BtJYyObAQmff2MQp.qFP7/kmwU1bBZ1"
    ["user_nicename"]=>
    string(13) "daveinbedstuy"
    ["user_email"]=>
    string(19) "djl135e54@yahoo.com"
    ["user_url"]=>
    string(55) "http://bstoner.wpengine.com/forums/users/daveinbedstuy/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:23:53"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(13) "daveinbedstuy"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(3864)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Can the super not recommend someone? It’s a relatively simple and straighforward job ewith perhaps the largest issue being to minimize the dust on demolition.

mrlithe | 9 years and 6 months ago

string(1) "1"
object(WP_User)#4927 (8) {
  ["data"]=>
  object(stdClass)#4926 (12) {
    ["ID"]=>
    string(5) "59935"
    ["user_login"]=>
    string(7) "mrlithe"
    ["user_pass"]=>
    string(34) "$P$BSGrlu42cSjmFWfuHFezFSyDqpuO4Q0"
    ["user_nicename"]=>
    string(7) "mrlithe"
    ["user_email"]=>
    string(23) "jasonstefanik@gmail.com"
    ["user_url"]=>
    string(49) "http://bstoner.wpengine.com/forums/users/mrlithe/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:28:56"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "mrlithe"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(59935)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Thanks! Do you know anyone who does that kind of job regularly or anyone you would recommend?

Augustiner | 9 years and 6 months ago

string(1) "1"
object(WP_User)#4925 (8) {
  ["data"]=>
  object(stdClass)#5094 (12) {
    ["ID"]=>
    string(5) "45573"
    ["user_login"]=>
    string(10) "Augustiner"
    ["user_pass"]=>
    string(34) "$P$B34SD8yEA6Hi8EPJJfH83mCf4GZmmP0"
    ["user_nicename"]=>
    string(10) "augustiner"
    ["user_email"]=>
    string(18) "flo@flat-peach.com"
    ["user_url"]=>
    string(32) "http:///forums/users/augustiner/"
    ["user_registered"]=>
    string(19) "2017-08-10 13:35:10"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(6) "August"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(45573)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Depends a bit on the circumstances The floor transition has to be refinished. Hard to say – but anywhere between $ 2500-5000\. The cheaper solution is to use a door frame/ trim, because you won’t have to do plasterwork an repaint both sides