Recommendations for replacing metal hatches to basement

Our metal hatches are old, poorly made, and not air- or water-tight, and we’re looking to have them replaced (one in front and one in back). Can anyone recommend a good, reliable company to handle this? We’ve heard it will cost about $1K per hatch, which sounds like a lot. Is this right? We’re looking for hatches that will really last and also have a feature we’ve seen, where there is a tiny lid in the hatch that a garden hose running from the basement will fit through (we don’t have a faucet in the front yard).

Kate

in Metalwork 13 years and 5 months ago

8

Please log in, in order to post replies!

8 replies

Newest Oldest

casamia | 13 years and 5 months ago

string(1) "1"
object(WP_User)#5112 (8) {
  ["data"]=>
  object(stdClass)#4884 (12) {
    ["ID"]=>
    string(5) "51583"
    ["user_login"]=>
    string(7) "casamia"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(7) "casamia"
    ["user_email"]=>
    string(19) "julianaum@gmail.com"
    ["user_url"]=>
    string(22) "/forums/users/casamia/"
    ["user_registered"]=>
    string(19) "2017-08-10 13:38:01"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "casamia"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(51583)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

We just got our metal cellar door replaced after a break-in.  Our friend recommended Abdul, and he was fast and well $.  We’ve since asked all our metalwork for the windows to be re-done by him.  Abdul 718-581-3991\.  Great and reliable.  Tell him Juliana referred you.

slopemope | 13 years and 5 months ago

string(1) "1"
object(WP_User)#4895 (8) {
  ["data"]=>
  object(stdClass)#4894 (12) {
    ["ID"]=>
    string(6) "161310"
    ["user_login"]=>
    string(9) "slopemope"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(9) "slopemope"
    ["user_email"]=>
    string(19) "slopemope@yahoo.com"
    ["user_url"]=>
    string(24) "/forums/users/slopemope/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:24:00"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(9) "slopemope"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(161310)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

The bilco doors now have a model with gas shocks that open themselves – me want!!!  The steel is plenty heavy on these doors, its not diamond plate but if someone’s coming around with a blowtorch or drill and jigsaw they’re getting regardless.     if you have masonry building you might be better off having a facade person install.  imo its the masonry that will be the weak link if you get a premade door.  i find ironworkers too brute for the job of insuring something is sealed watertight.     otherwise a handyman could do it.   http://www.youtube.com/watch?v=Pe0tjfqNqXw

bpie | 13 years and 5 months ago

string(1) "1"
object(WP_User)#4891 (8) {
  ["data"]=>
  object(stdClass)#5113 (12) {
    ["ID"]=>
    string(5) "74388"
    ["user_login"]=>
    string(4) "bpie"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(4) "bpie"
    ["user_email"]=>
    string(27) "smattiellodegroot@yahoo.com"
    ["user_url"]=>
    string(46) "http://bstoner.wpengine.com/forums/users/bpie/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:30:04"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(4) "bpie"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(74388)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

Oh, and they also have a nice locking latch on the inside, where you could put a padlock on it, for security.

bpie | 13 years and 5 months ago

string(1) "1"
object(WP_User)#5112 (8) {
  ["data"]=>
  object(stdClass)#5115 (12) {
    ["ID"]=>
    string(5) "74388"
    ["user_login"]=>
    string(4) "bpie"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(4) "bpie"
    ["user_email"]=>
    string(27) "smattiellodegroot@yahoo.com"
    ["user_url"]=>
    string(46) "http://bstoner.wpengine.com/forums/users/bpie/"
    ["user_registered"]=>
    string(19) "2017-08-10 14:30:04"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(4) "bpie"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(74388)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I used Vinny’s.  They were great.  They came and measured, came the next morning and had it all done within a couple of hours.  I forgot what I paid, but it was reasonable.  I had them install one hatch in the front and one in the back.  They also put in a ladder from the cellar up to front hatch.  I run my hose from the cellar up through the front hatch and out through a little hole in the grating on the vent hatch.  I just don’t leave the hose outside; when I’m done I pull it back into the cellar.  I would use them again; they are quick and know what they are doing.

brewguy | 13 years and 5 months ago

string(1) "1"
object(WP_User)#4895 (8) {
  ["data"]=>
  object(stdClass)#5114 (12) {
    ["ID"]=>
    string(5) "30906"
    ["user_login"]=>
    string(7) "brewguy"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(7) "brewguy"
    ["user_email"]=>
    string(14) "mike@benit.com"
    ["user_url"]=>
    string(49) "http://bstoner.wpengine.com/forums/users/brewguy/"
    ["user_registered"]=>
    string(19) "2017-08-10 13:47:15"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "brewguy"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(30906)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I just replaced my old, heavy basement door with a standard Bilco door. Light weight and not too much trouble to install. So much easier to open the doors now.

HouseNut | 13 years and 5 months ago

string(1) "1"
object(WP_User)#5115 (8) {
  ["data"]=>
  object(stdClass)#4891 (12) {
    ["ID"]=>
    string(5) "45965"
    ["user_login"]=>
    string(8) "HouseNut"
    ["user_pass"]=>
    string(34) "$P$BhfkFH3s4gG9kG.gygxNT9BfagYY5p1"
    ["user_nicename"]=>
    string(8) "housenut"
    ["user_email"]=>
    string(23) "jsw_polemic@hotmail.com"
    ["user_url"]=>
    string(23) "/forums/users/housenut/"
    ["user_registered"]=>
    string(19) "2017-08-10 13:36:01"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(8) "HouseNut"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(45965)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

We used Bayridge ironworks for our hatch and window guards.  They were great, but the rear hatch was about $1400.  It doesn’t have the feature you mentioned but is water tight, and probably a little too airtight.

CMPXCHG | 13 years and 5 months ago

string(1) "1"
object(WP_User)#5112 (8) {
  ["data"]=>
  object(stdClass)#5116 (12) {
    ["ID"]=>
    string(5) "83536"
    ["user_login"]=>
    string(7) "CMPXCHG"
    ["user_pass"]=>
    string(0) ""
    ["user_nicename"]=>
    string(7) "CMPXCHG"
    ["user_email"]=>
    string(16) "hjb417@gmail.com"
    ["user_url"]=>
    string(22) "/forums/users/cmpxchg/"
    ["user_registered"]=>
    string(19) "2010-10-28 16:14:22"
    ["user_activation_key"]=>
    string(20) "qGH6gQDWBBi7vKWRRsYj"
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(7) "CMPXCHG"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(83536)
  ["caps"]=>
  array(2) {
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(2) {
    [0]=>
    string(10) "subscriber"
    [1]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(4) {
    ["read"]=>
    bool(true)
    ["level_0"]=>
    bool(true)
    ["subscriber"]=>
    bool(true)
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

We had ours done by Custom Metal Products @ http://www.ironworkny.com/. It was a dual lock (lock on the inside and outside) front hatch and it cost around $700.

timber | 13 years and 5 months ago

string(1) "1"
object(WP_User)#4895 (8) {
  ["data"]=>
  object(stdClass)#5117 (12) {
    ["ID"]=>
    string(5) "12567"
    ["user_login"]=>
    string(6) "timber"
    ["user_pass"]=>
    string(34) "$P$BECcKQMWTvxEKriDkOxFufw7fD/ke01"
    ["user_nicename"]=>
    string(6) "timber"
    ["user_email"]=>
    string(17) "WaltherTR@msn.com"
    ["user_url"]=>
    string(0) ""
    ["user_registered"]=>
    string(19) "2008-07-10 17:38:58"
    ["user_activation_key"]=>
    string(0) ""
    ["user_status"]=>
    string(1) "0"
    ["display_name"]=>
    string(6) "timber"
    ["spam"]=>
    string(1) "0"
    ["deleted"]=>
    string(1) "0"
  }
  ["ID"]=>
  int(12567)
  ["caps"]=>
  array(1) {
    ["bbp_participant"]=>
    bool(true)
  }
  ["cap_key"]=>
  string(15) "wp_capabilities"
  ["roles"]=>
  array(1) {
    [0]=>
    string(15) "bbp_participant"
  }
  ["allcaps"]=>
  array(1) {
    ["bbp_participant"]=>
    bool(true)
  }
  ["filter"]=>
  NULL
  ["site_id":"WP_User":private]=>
  int(1)
}

I had one made a few years ago for about $700 – brought in a simple sketch of what I wanted.   I think i  used Vinny’s Ironworks.  I’ve had a good experience and good prices more recently using Aldo Ironworks in Red Hook.