EDR for Convector radiator?
Sorry I did not realize only one picture was allowed in each post and I cannot figure out how to edit the post once it is up. Here is a picture of the steam convector radiator I wish to calculate the EDR for.
Sorry I did not realize only one picture was allowed in each post and I cannot figure out how to edit the post once it is up. Here is a picture of the steam convector radiator I wish to calculate the EDR for.
Well done, eman.
The Arco Convector is dimensioned as follows:
3 Sections totaling 30 inches across in width,
5.5 inches deep madeup of 3 tubes,
6 inches in height (not including the rods that elevate) comprised of 3 rows,
if the elevating rods are included, the height is 15 inches off the floor.
The Sunrad is 18 inches wide comprised of 8 sections,
3.25 inches deep with apparently 4 slots,
overall height is 20 inches tall.
Thank you all for educating me.
http://www.heatinghelp.com/files/articles/928/299.pdf
If you can post the dimension measurements, I can size it for you.
http://www.GatewayPlumbing.com
steamedup,
If you have any other of the Arco type pictured that you want to unload, please let me know.
Lots of detailed advice and tech info on this kind of stuff on heatinghelp.com. Also, you can post a query there.
I also wish to calculate EDR for a Sunray radiator. There does not seem to be a way to attach a picture to a followup post so if someone can tell me how I will post a picture of it.