Removing Paint Mist from Window?
Hello, A few months ago, my co-op’s ironwork was touched up and repainted, a process that included the security grating outside of my windows. Unfortunately, after thoroughly cleaning my windows the other day I’ve realized that there is a good deal of paint mist / residue on the window leftover from the job. The ironwork…
Hello,
A few months ago, my co-op’s ironwork was touched up and repainted, a process that included the security grating outside of my windows. Unfortunately, after thoroughly cleaning my windows the other day I’ve realized that there is a good deal of paint mist / residue on the window leftover from the job.
The ironwork people are obviously long gone and I’m assuming that talking to them would be futile, so does anyone have a recommendation as to how I might be able to remove the paint? I sincerely doubt that a razor would do the trick, since it is a fine mist rather than actual gobs of spilled paint.
Thanks for any help!
I would try the detailing clay used on cars. I had some paint over spray on my car window and the clay removed it and it won’t scratch your glass. You should be able to get it at an auto supply store.
be really careful, single edge razors can scratch glass. I would take the corners off of the razor blades before I started (Drag the corners gently on a piece of sandpaper, or an emery board). Another alternative would be the plastic razor blades made specifically for this purpose. I think Lee Valley Hardware carries them (WWW.leevalley.com)
Thanks for the tips, everyone! Very helpful.
I’ve removed paint mist with very fine steel wool. Be gentle.
You are referring to the window glass and not the sash right?
My weapon of choice would be a glass scraper. Basically a 4″ wide razor blade on a handle. Scrape with the glass wet. This will lubricate it so you don’t scratch the glass.
Like Senator said. That’s what god invented single edge razors gor. Get the metal holder and it’ll be far more comfortable to use than the little plastic ones
I have found that a single edged razor blade is the best for paint on glass (mist or gobs).
Other than that try a paint solvent (thinner, turpentine, etc) on a rag.