Forum
« Anyone have any info or know where I can get info on the DUMBO Art show this weekend? Getting grease out of bluestone »
September 26, 2007
Fixing pocket doors
Our pocket doors wont properly slide in and out. not clear if this is because of the tracks being warped, the doors being warped, the wheels not working or what. does anyone have a recommendation for someone who can fix this? and any idea how much this costs?
thanks a lot.
Comments
If you can roll the doors at all, pull it out to beyond the halfway point of the doorway. Then check for obstructions such as plaster that has fallen off the back of the walls and perhaps loose electrical wires. You will need a flashlight and vacuum cleaner.
Next look for points of contact at the top of the jamb. Multiple layers of paint and door warpage may cause contact. A little paste wax applied to the jamb will alleviate the friction.
The rollers under the door are called sheaves and are still manufactured today. (Hettich makes them) If you have a broken axle you will need to replace it. Removal of the pocket door is as easy as lifting it up 1/2" and tilting it out. Good to have a second person.
Posted by: southslope at September 26, 2007 11:13 AM
our contracter hinged it from the top... we had the same problem and now they work beautifully!
Posted by: brooklynisis at October 10, 2007 11:32 AM
Post a comment
Please be patient while your comment is published. It may take a moment.