Forum
« Sistering to the main support beam in our 3 story brick house Super Wanted Carroll Gardens »
April 19, 2007
Decks
W need to replace our falling apart deck. We would like it to be the same as it is currently .
Are there new rules about how they can be constructed?
How do I find out? And do I need a permit?
any advice would be appreciated
Comments
some basic info:
decks are considered structural components and therefore require building permits and blueprints from licenced engineer/ architect
you can not use combustible materials within (3 feet?) of lot lines
existing decks are not grandfathered to avoid current regulation
City leaflet about decks:
http://home2.nyc.gov/html/dob/downloads/pdf/swimpools.pdf
Posted by: Girgis at April 19, 2007 2:31 PM
I just finished a deck on my parlor floor in the Slope. I had Joe from Aetna [347-612-9816] do the steel work (all steel framing, stairs and railing) and Steve Rayboy did the wood decking in Ipe. It came out great and I expect it to last a long long time. My understanding is that steel decks are acceptable under the code up to the property line but there may be some question as to whether IPE can go to the property line. If you research IPE online, it is reported as being Class A fire rated - same as concrete or steel. But it may not be truly "non-combustible." Steve's website has some cool photos of his work at www.urbanexteriors.biz. 718-789-7398. Both were very easy to work with and did what they said they would for the price agreed. IPE is expensive and more challenging to work with than pressure treated pine but it looks great and has a great track record (it is used on many boardwalks). I had spoken briefly to Sketch and Hammer (did not get a price) and got the impression that they had trouble working with IPE while Steve seemed to know exactly what to do. If you go the architect & permit route that adds about $3,500 to the cost.
Posted by: Anonymous at April 19, 2007 3:12 PM
I just finished a deck on my parlor floor in the Slope. I had Joe from Aetna [347-612-9816] do the steel work (all steel framing, stairs and railing) and Steve Rayboy did the wood decking in Ipe. It came out great and I expect it to last a long long time. My understanding is that steel decks are acceptable under the code up to the property line but there may be some question as to whether IPE can go to the property line. If you research IPE online, it is reported as being Class A fire rated - same as concrete or steel. But it may not be truly "non-combustible." Steve's website has some cool photos of his work at www.urbanexteriors.biz. 718-789-7398. Both were very easy to work with and did what they said they would for the price agreed. IPE is expensive and more challenging to work with than pressure treated pine but it looks great and has a great track record (it is used on many boardwalks). I had spoken briefly to Sketch and Hammer (did not get a price) and got the impression that they had trouble working with IPE while Steve seemed to know exactly what to do. If you go the architect & permit route that adds about $3,500 to the cost.
Posted by: Anonymous at April 19, 2007 3:12 PM
Joe did my steelwork too. Did a great job and was very responsive. Used Ipe for the decking. It's smooth and looks amazing. Sketch & Hammer didn't do the decking tho.
Posted by: John at April 19, 2007 4:23 PM
Post a comment
Please be patient while your comment is published. It may take a moment.